A worn, oil-stained, cracking bare concrete garage floor before an epoxy coating Illustrative example: the same garage floor finished with a smooth, glossy epoxy coating Illustrative

↔ Drag to compare · Illustrative example

★ Boise & the Treasure Valley

Garage Floor Epoxy Boise.
Shop, commercial & man-cave floors.

Coated by a local family crew.

Call (208) 285-7685Free estimate over the phone, straight answers What affects your price30-second calculator

Free, no-obligation estimate. Straight answers on what your floor takes, no phone tree.

Free, no-obligation estimate
Family owned, we do the work ourselves
The crew that prices your floor is the crew that coats it
Built for Idaho freeze-thaw, commercial-grade systems
Free, no-pressure estimate in writing
How it works

How does an epoxy floor job actually go?

A clear spec, an estimate in writing, and a final walk-through when the job is done.

1

Free estimate over the phone

We assess the slab, loads, and chemicals, then recommend the right system and put the estimate in writing. Free, no obligation.

2

Prep & coat, in sequence

Diamond grind, repair, prime, build, and topcoat. No skipped steps, no rushed cure times.

3

You approve the work

We walk the finished floor with you and fix any spot that needs it.

What moves your price

What affects the cost of your Boise epoxy floor?

Pick the space and size below for a live ballpark range based on typical market rates for epoxy flooring. Your specific estimate is always free.

1What space needs coating?
1-Car GarageEconomical
2-Car GarageMid-range
3-Car GarageMid-range
Shop / Auto BayCustom
Warehouse / CommercialCustom
2About how big? (square feet. 1-car approx 250, 2-car approx 450, 3-car approx 700)
sq ft
3Any of these apply?
Your estimated range

A ballpark only, computed from typical market rates for professionally installed epoxy floors (national cost guides such as HomeGuide and Angi put most jobs at roughly $3 to $12 per sq ft installed). The exact number firms up with a free estimate over the phone at your actual concrete and any repairs needed.

Call for your free estimate

Boise and the Treasure Valley. The crew confirms the final price after your estimate call.

Coating systems we install

What kind of floors do we coat in Boise?

Every system is matched to the loads, chemicals, and traffic the floor actually carries.

Commercial warehouse epoxy floor with high-build coating

Warehouse Epoxy Flooring

High-build epoxy floor coatings rated for forklift and pallet-jack traffic across large Boise slabs, with optional line striping for safer traffic lanes.

Warehouse floors →
Auto repair shop epoxy floor with chemical-resistant finish

Auto & Repair Shop Floors

Chemical-resistant epoxy systems that take oil, brake fluid, and solvent without staining. Anti-slip aggregate added at wash bays and lifts.

Shop floors →
Showroom epoxy floor with high-gloss decorative finish

Showroom & Retail

High-gloss flake and solid-color systems that read upscale under store lighting, and hold up to constant foot traffic.

Showroom finishes →
Flake broadcast epoxy floor with colorful decorative finish

Flake & Broadcast Floors

Full-flake broadcast systems with a polyaspartic topcoat. Hides scuffs, adds traction, and reads clean in a shop or a garage.

Flake floors →
Metallic poured epoxy floor with premium decorative finish

Metallic Epoxy

Premium poured-metallic finishes with depth and movement, sealed under a durable topcoat. The high end of decorative concrete.

Metallic epoxy →
Large residential garage epoxy floor with commercial-grade coating

Garage Epoxy & Large Slabs

Estate garages, fleet bays, and oversized residential slabs that need a commercial-grade build, not a hardware-store kit.

Garage floors →
Finished glossy epoxy garage floor, illustrative example

Which coating is right for your floor?

Epoxy or polyaspartic: a straight comparison of installation time, warranty, color options, and cost so you know which one fits your garage.

Epoxy vs. polyaspartic →
Why local wins

Why hire a Boise crew instead of a franchise?

Worried it’ll peel in a couple years? Prep that actually holds

We diamond grind every slab. Most coating failures trace back to skipped prep, so we never skip it. The coating keys into the concrete instead of sitting on top. Our garage floor prep guide walks through exactly what happens to your slab and what you need to do first.

Tired of franchises and 1-800 numbers? You reach a real Boise crew

No franchise headquarters, no job handed off to a stranger. One call to a local Boise crew gets it started.

Will it take forklifts and heavy equipment? Spec'd to your loads

Forklift traffic, chemical exposure, and wash-down each call for a different build. We size the system to the real demands of your space, not a one-size DIY kit.

Worried about surprise charges? We put it in writing before work starts

If a slab has a moisture or crack problem that has to be addressed first, you hear it up front, on the walk-through, with the number in writing before anyone mixes a batch.

Written estimate, no down payment

We assess the job with you and put the number in writing before any work begins.

Have a question about your slab or equipment? Call (208) 285-7685 and get a straight answer on it.

Why not a big-box kit?

How does a pro install compare to a DIY box-store kit?

The price gap is real, but so is the difference in how long the floor lasts.

Pro install (us) DIY box-store kit
Surface prep Diamond grinding, crack repair Acid etch or a quick scrub
Coating High-build, high-solids epoxy with a polyaspartic topcoat Thin, water-based single coat
Hot-tire & forklift hold-up Rated for it Often peels where hot tires sit
How long it lasts Backed by our lifetime warranty against peeling or lifting Months to a few years

If you are weighing a weekend project against hiring it out, our full DIY kit vs professional install comparison goes through where store-bought floors actually fail and when a kit is genuinely the right call. Already decided and just picking a date? When to epoxy a garage floor in Boise covers season and slab temperature, and how to clean and maintain an epoxy floor covers what upkeep looks like once it is down.

Where we work

We coat floors across Boise, Meridian, Nampa, Eagle, Caldwell, Star, Kuna Garden City, and Garden City, from the North End and the Bench out to Canyon County. If your shop, warehouse, showroom, or garage sits within roughly 40 miles of downtown Boise, you are on our map. Call (208) 285-7685 to confirm coverage and set up a free epoxy floor estimate.

That oil-stained slab greets you every time the door rolls up.

Oil spots that soaked in years ago, hairline cracks, and gray dust that settles right back no matter how often you sweep. You see it every time you pull in, and every neighbor sees it when the door goes up on a Saturday morning.

We fix that in a couple of visits: grind the slab, fill the cracks, and lay down a hard epoxy finish that wipes clean after a winter of sand and slush and takes a dropped wrench without a mark. Call (208) 285-7685 for a free estimate over the phone with the number in writing before any work starts. No obligation.

Good questions

What do Boise customers ask most?

Common questions about epoxy flooring in Boise.

How much does epoxy flooring cost in Boise?
By the square foot and by the build. A warehouse floor rated for forklifts is a different system than a two-car garage, so the honest answer is a range: less for a standard solid-color floor, climbing for high-build, chemical-resistant, or metallic finishes. Slab condition and crack repair move the number too. The phone estimate that pins it down is free.
Can your floors handle forklift and heavy traffic?
Yes. For warehouse and shop environments we install high-build, high-solids epoxy systems rated for forklift, pallet-jack, and vehicle traffic. The right build thickness and a durable polyaspartic topcoat are what carry those loads without chipping. We spec the system to the actual loads your floor sees.
Will the coating resist oil, chemicals, and wash-down?
A properly installed epoxy system is sealed and non-porous, so oil, hydraulic fluid, antifreeze, and most shop chemicals sit on top instead of soaking in. For auto shops, manufacturing, and other heavy-chemical environments we select systems with enhanced chemical-resistance ratings and add anti-slip aggregate at wash bays and lifts.
How long does an install take, and how much downtime?
It depends on square footage, slab condition, and the number of coats. A typical project runs one to several days from prep through final topcoat, with cure time between layers. We schedule and sequence the work around your operating hours wherever possible to keep downtime to a minimum, and we give you a specific timeline in the written estimate.
Why not just use a DIY or big-box epoxy kit?
Hardware-store kits use thin, water-based epoxy and skip the steps that make a floor last: diamond grinding, moisture testing, crack repair, and commercial-grade materials. They tend to look good for a few months, then peel where hot tires sit. Our multi-coat systems are built to last, and they come with our lifetime warranty against peeling or lifting.
Can you coat an old or cracked concrete floor?
Yes, and we do it often. Old concrete needs to be mechanically profiled by diamond grinding, and cracks and spalling are repaired before coating. As long as the slab is structurally sound and free of serious moisture problems, age is not a barrier. We do not coat over wide or actively moving cracks until the underlying concrete issue is addressed.
Does epoxy hold up to Idaho's freeze-thaw cycles?
Yes, and Boise winters are exactly why the prep matters. A professionally installed system keys into the slab rather than sitting on the surface, so freeze-thaw movement and tracked-in road sand do not lift it. Epoxy is also temperature-sensitive during install, so we schedule for the right conditions or bring the space up to temperature with heaters and never rush a cold-weather cure. That is the kind of detail a DIY kit skips.
What areas around Boise do you cover?
We coat floors across Boise and the wider Treasure Valley: Meridian, Nampa, Eagle, Caldwell, Star, Kuna, and Garden City. In Boise itself that runs from the North End and East End up into the foothills, across the Bench and West Boise, and out through Northwest Boise and the Southeast subdivisions. If you are not sure your address is in range, call and we will tell you straight away.
What does a free estimate include, and is there a deposit?
A crew member comes out, looks at the actual slab, measures the space, and talks through the finish options with you. You get a written, itemized estimate covering prep, the coating system, and the topcoat, so nothing is buried in one number. There is no down payment and no obligation to proceed.
How long before I can walk on and park on the new floor?
A standard two-car garage usually runs prep and base coat on the first visit, then the topcoat once that coat cures, normally the next day. You can walk on the floor after the final coat cures and park on it after the full cure window. Temperature moves both windows, so we confirm the exact timing for your slab in the written estimate.
What is the difference between flake, solid color, and metallic epoxy?
Solid color is a pigmented base coat with no decorative layer, so you get a flat, uniform floor. Flake adds vinyl chips broadcast over the base coat before the clear topcoat, giving a speckled granite look with more texture and better hiding of scuffs. Metallic is a hand-worked pigment pour that produces a marbled, one-off pattern. All three use the same prep.
Do you install polyaspartic as well as epoxy?
Yes, and often together. Our standard garage build uses a high-solids epoxy base for color, flake, and bond strength, then a polyaspartic or polyurethane topcoat for heat and wear resistance. Full polyaspartic systems install as a one-day process with a faster return to service. Epoxy systems carry a lifetime warranty against peeling or lifting; polyaspartic carries a 10-year warranty.
How do you clean and maintain an epoxy floor?
Sweep out grit and winter road sand, then damp mop with mild soap and water when the floor needs it. The sealed, non-porous surface means motor oil, brake fluid, and antifreeze wipe up instead of soaking in. The one real rule is to skip harsh solvent cleaners, which can dull the topcoat over the years.
What should I have ready before install day?
Clear the space of vehicles, stored items, and anything mounted low on the walls so the crew can reach the whole slab. You do not need to supply anything else; we bring all equipment and materials. Prep and coating create some odor and dust, so keep interior doors to the house closed while we work.
Do you coat basements, shops, and pole barns too?
Yes. Garages are the most common job, but the same systems go down in basements, detached shops, pole barns, warehouses, auto and repair bays, and retail showrooms. The method does not change: diamond-grind the slab, repair the damage, then coat it with a system matched to what the space actually does all day.
Does the work have to shut a commercial floor down?
Not usually. For retail, showroom, and shop floors we schedule prep and coating for nights, early mornings, or a slow day, and phase larger spaces section by section so part of the floor stays in use. We plan the staging and cure windows around your operating hours before the job starts.
What warranty comes with an epoxy or polyaspartic floor?
Our epoxy systems carry a lifetime warranty against peeling or lifting, and polyaspartic systems carry a 10-year warranty against peeling or lifting. That warranty is only worth what the prep behind it is worth, which is why every floor gets diamond-ground and every crack and spall gets repaired before a coat goes down.
How many flake colors can I choose from?
More than 80 flake color blends, with flake sizes running from 1/16 inch up to 1 inch. Custom combinations can be mixed to match the rest of the house or your brand colors, so you are not stuck picking from a handful of stock looks. Flake size and color mix get settled on the call.
Does a hot tire lift the coating?
Not on a properly built system. Hot tire pickup is a failure mode of budget water-based epoxy, which softens under a hot tire and peels away when the vehicle moves. We use high-solids epoxy under a polyaspartic or polyurethane topcoat, which has a far higher heat tolerance and handles everyday hot tire contact.
When is the best time of year to coat a floor in Boise?
Any time, with one caveat: epoxy is temperature-sensitive while it cures. In cold months we either schedule for the right window or bring the space up to temperature with heaters, and we never rush a cold-weather cure. Spring and fall book up fastest, so call ahead if you want a specific week.

About Boise Epoxy Pros

Boise Epoxy Pros installs epoxy floor coatings across the Treasure Valley, from downtown Boise and Garden City out through Meridian, Eagle, Star, Kuna, Nampa, and Caldwell. Warehouses, auto and repair shops, showrooms, garages: if it has a concrete slab that works for a living, we coat it with a commercial-grade system built for Idaho freeze-thaw, heavy traffic, and chemical spills.

Ready to make that concrete look new again?

One call gets you a free epoxy floor estimate, and your call gets answered. No pressure, no obligation.

(208) 285-7685
Call for a free estimate
Tap to Call for a Free Estimate